Laboratory Melting Furnaces Electrically Heated

KC 2/15 K2/10 as crucible furnace with steel crucible for lead melting

KC 2/15

K 1/10 - K 4/13, KC 1/15 + KC 2/15

These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not for KC) on the front of the furnace make exact dosing easy when pouring the melt. The furnaces are available for furnace chamber temperatures of 1000, 1300, or 1500 °C. This corresponds to melt temperatures of about 80-110 °C lower.

  • Tmax 1000 °C, 1300 °C, or 1500 °C, with melt temperature about 80 - 110 °C lower
  • Crucible sizes of 1, 2, or 4 liters
  • Crucible with integrated pouring spout of iso-graphite included with delivery
  • Spout (not for KC), mounted at the furnace for exact pouring
  • Compact bench-top design, simple emptying of crucible by tiltiing system with gas damper
  • Crucible for heating of furnace insulated with a hinged lid, lid opened when pouring

Additional equipment

  • Other crucible types available, e.g. steel
  • Design as crucible furnace without tilting device, e.g. for lead melting
  • Over-temperature limiter for the furnace chamber with automatic reset to protect against over-temperature. The limit controller switches off the heating when the pre-set limit temperature has been reached and does not switch it on again until the temperature falls below the setting again.
  • Observation hole for melt
ModelTmaxCrucibleVolumeOuter dimensions in mmHeatingElectricalWeight
 °C in lWDHpower in kW4connectionin kg
K 1/101000A 61.05206806603.0single-phase85
K 2/101000A102.05206806603.0single-phase90
K 4/101000A254.05707557053.6single-phase110
K 1/1321300A 61.05206806603.0single-phase120
K 2/1321300A102.05206806603.0single-phase125
K 4/1321300A254.05707557055.53-phase1170
KC 1/1531500A61.058063058010.53-phase170
KC 2/1531500A102.058063058010.53-phase170
1Heating only between two phases
2Outer dimensions of furnace, transformer in separate housing (500 x 570 x 300 mm)
3Switchgear and controller mounted in a floor standing cabinet
4Depending on furnace design connected load might be higher